Most Florida buyers, and most owners getting insurance or financing, need a condition and valuation (C&V) survey done with the boat hauled out. It covers the hull, structure, systems and safety gear and ends in a written report with a market value. Budget roughly $20–$32 per foot nationally, with about a $500 minimum, plus the haul-out and any separate engine survey. Hire a credentialed surveyor (see below), because the trade is not licensed.
What a marine survey inspects
A full survey covers the hull above and below the waterline, the deck and structure, the running gear, and the electrical, fuel, plumbing and mechanical systems. It also covers the interior, electronics and safety equipment such as flares, extinguishers and life jackets. The surveyor then writes up condition and value.
On a fiberglass hull, the surveyor checks gelcoat or paint, taps the surface with a light mallet (percussion sounding) and uses a moisture meter. Below the waterline, they also look at the keel attachment, rudders, struts, propellers, shafts, cutlass bearings and shaft alignment. Tapping and moisture readings are how a surveyor finds voids or delamination that look fine from a distance.
A general surveyor is not an engine mechanic, and rigging is its own specialty. Ask your surveyor what is and isn't in the scope, and whether you need a separate engine or rigging survey.
Which survey type fits your situation
Match the survey to why you need it.
| Survey | Situation | Hauled? | What the report delivers |
|---|---|---|---|
| C&V (pre-purchase) | Buying; financing; many insurers | Yes, for a proper one | Hull, structure and systems, with market and replacement value |
| Limited C&V | Insurance | Depends on the carrier | Scope and content set by each insurer |
| Damage | After something goes wrong | As needed | Nature, cause and extent of damage |
| Appraisal | Financing, estates, divorce, donation | Varies | Value recognized by the IRS, courts and banks |
What a survey costs
One Rockledge, Florida surveyor prices boats up to 50 feet at $25 to $32 per foot. For a deeper look, see what a marine survey costs by region.
Extras matter. Having a qualified mechanic assess each engine separately costs roughly $500 per engine, while a sailboat's rigging gets its own inspection at $400 to $600 (BoatUS, February 2026).
For a 32-foot boat with twin outboards:
- Hull survey: 32 feet × $25–$32 = $800–$1,024, which clears the roughly $500 minimum.
- Engine surveys: about $500 per engine, so about $1,000 for two.
- Subtotal: $1,800–$2,024 before haul-out.
Haul-out is usually billed separately from the survey, so get a yard quote for the lift and blocking. Price also moves with boat type and age, location, and whether there is a sea trial. Compare quotes rather than expecting one fixed number.
Choosing a qualified marine surveyor
Anyone can call themselves a surveyor, since no state or federal licensing exists. NAMS-CMS and SAMS-AMS designations are the usual marks of professional standing. Confirm that your insurer or lender accepts the one your surveyor holds.
Membership alone doesn't prove knowledge of boat systems. ABYC certifications do, in areas such as marine electricity, diesel engines and corrosion. Interview several candidates about experience with your boat type, and bring in a specialist if your systems are complex.
You can browse surveying pros by location on our marketplace and check each profile's reviews and verification details.
When insurers and lenders require a survey
Each carrier and lender sets its own rules, so confirm yours, and see whether your insurer needs a survey. One published carrier rule requires an out-of-water survey at 10 years old for salt-water boats and every five years after; for fresh water, it starts at 15 years.
The same rule asks for one on performance boats over 10 years old anywhere, while liability-only coverage on a boat 10 or older can be accepted with an in-water survey (AMIG).
Another carrier program requests surveys when a boat is over 20 years old and 30 feet or longer, or worth $50,000 or more. The buyer or policyholder pays, since insurers don't cover that cost.
Survey day and using the report to negotiate
Plan on at least a day of work, covering the haul-out, inspection, any sea trial, and report writing with market research. The surveyor reports verbally on site, then delivers the written report.
A good report should include:
- The client's name, the location and date, and the reason for the inspection
- Whether the boat was hauled or afloat, and the standards used
- Vessel specifications such as length, breadth, draft, year and identifying numbers
- Photos next to each defect
Use the listed deficiencies, photos and value estimate to renegotiate the price or have the seller fix problems before closing. Get repair quotes for each item so you can ask for a specific price reduction. If the findings are serious, walking away is a fair outcome.
To line up a surveyor, compare quotes from surveying pros on our marketplace and ask questions before you book.
Related pages and posts
- How Much Does a Marine Survey Cost? Pre-Purchase, Insurance, and Condition & Value Surveys Priced by Region
- Do I Need a Marine Survey for Boat Insurance?



